SAF and SAW housing are split plummer block housings

SAF and SAW housing are split plummer block housings consisting of a cap and base, SAF housings have two or four holes cast into the base for attachment bolts,SAW series housings have four cast holes.SAF housings are avaiable in two designs depending on the series,the designs have the same dimension,these housings are wider to accommodate wider 32series bearings or to accommodate the larger axial displacement of bearings in the 22 series. SAF and SAW split plummer block housings have advanced design,is to simplify mounting and make alignment more accurate,the feet of these housing have a flat,square design. using sealed bearings in housing with standard seals is a good solution for highly contaminated environments,the sealed bearing together with housing seal and grease provide  three layers of pretection,SAF Split plummer block housing for sealed spherical roller bearings are identified by designation SAF500W,complete pillow blocks are identified by designation SAFB225 ,when using taconite heavy-duty seals ,sealed spherical roller bearings does not enhance the sealing effect

during operation,but still protects the bearing against contaminants during mounting,

 

SAF split Pillow blocks in the 15,16,225,226,230,C25,C26 and C30 series and SAW Pillow blocks in the 235 series accommodate bearings on an adapter sleeve on plain shaft, SAF and SAW split plummer block housings can be used for both the locating and non-locating bearing position,the housings are machined standard for bearings in the non-locating position.bearings in the locating position as well as CARB toroidal roller bearings must be secured in the housing with one or two stabilizing rings,

 

SAF and SAW split plummer block housings are intended for loads acting perpendicularly toward the support surface,Those housing are made of spheroidal graphite cast iron.SAF And SAW housing caps have two drilled and tapped lubrication holes for oil and grease lubrications.and the housings are typically supplied as complete kits including housing,seals,bearings,adapter sleeve ,nut,washer and a standard stabilizing ring, for example.

 

Pillow block SAF22524 consist of housing SAF524,Spherical roller bearings 22224 CC/W33,Adapter sleeves with lock nuts SNW24 4.3/16, two locating rings SR24-30, four labyrinth rings with O rings LOR113,3contact elements B-10724-113, and 1 end plug EPR14,

 

Designation of SAF Pillow blocks with self-aligning ball bearing :

SAF1507 is pillow block housing SAF507 + 1207K Bearing

SAF1509 is pillow block housing SAF509 + 1209K Bearing

SAF1609 is pillow block housing SAF609 + 1309K Bearing

SAF1510 is pillow block housing SAF510 + 1210K Bearing

SAF1610 is pillow block housing SAF610 + 1310K Bearing

SAF1511 is pillow block housing SAF511 + 1211K Bearing

SAF1611 is pillow block housing SAF611 + 1311K Bearing

SAF1513 is pillow block housing SAF513 + 1213K Bearing

SAF1613 is pillow block housing SAF613 + 1313K Bearing

SAF1515 is pillow block housing SAF515 + 1215K Bearing

SAF1615 is pillow block housing SAF615 + 1315K Bearing

SAF1516 is pillow block housing SAF516 + 1216K Bearing

SAF1616 is pillow block housing SAF616 + 1316K Bearing

SAF1517 is pillow block housing SAF517 + 1217K Bearing

SAF1617 is pillow block housing SAF617 + 1317K Bearing

SAF1518 is pillow block housing SAF518 + 1218K Bearing

SAF1618 is pillow block housing SAF618 + 1318K Bearing

SAF1520 is pillow block housing SAF520 + 1220K Bearing

SAF1620 is pillow block housing SAF620 + 1320K Bearing

SAF1522 is pillow block housing SAF522 + 1222K Bearing

SAF1622 is pillow block housing SAF622 + 1322K Bearing

 

 

Designation of SAF Pillow blocks with spherical roller bearing :

SAF22507 is pillow block housing SAF507 + 22207K Bearing

SAF22509 is pillow block housing SAF509 + 22209K Bearing

SAF22609 is pillow block housing SAF609 + 22309K Bearing

SAF22510 is pillow block housing SAF510 + 22210K Bearing

SAF22610 is pillow block housing SAF610 + 22310K Bearing

SAF22511 is pillow block housing SAF511 + 22211K Bearing

SAF22611 is pillow block housing SAF611 + 22311K Bearing

SAF22512 is pillow block housing SAF512 + 22212K Bearing

SAF22612 is pillow block housing SAF612 + 22312K Bearing

SAF22513 is pillow block housing SAF513 + 22213K Bearing

SAF22613 is pillow block housing SAF613 + 22313K Bearing

SAF22515 is pillow block housing SAF515 + 22215K Bearing

SAF22615 is pillow block housing SAF615 + 22315K Bearing

 

For more designation of SAF split pillow block housings and with CARB toroidal roller bearings,we will indicate next time.XRB as the biggest Plummer block housing supplier and China bearing manufacturer,it can supply the best solution for plummer block housing and the bearings according to their specific  applications.,it can supply Original SAF split pillow block housings,Our large quantity SAF split pillow block housings Stock can meet your need with lowest price and fast delivery.

 

We accepted DHL,FEDEX,TNT express for small order and samples order,also the transportation By AIR or By Sea,by Train are all avaiable.we are sure we can ship our SAF split pillow block housings to your office at the first time.More technical details,please contact with :

 

E-mail: brandbearings@gmail.com, 

Skype:brandbearings

www.xrbearing.com