Split plummer block housing with spherical roller bearing

Split  Plummer block housing is usually made of grey cast and spheroical graphite cast iron,it have many different design just like SNL Series,SNLD series,SD Series,SDD series,all of these plummer block housing are all can be working together with spherical roller bearings,which are designed on a building block principle,this enable more possibilities when it comes to selecting the bearing designs,shaft,seales and the type of lubricantion.

Split  Plummer block housing is easy to installation and pre-assembled shafts can be mounted in them,split plummer block are not only working with spherical roller bearings,but also self-aligning ball bearings,Carb toroidal roller bearing,the housings can accommodate bearing in the 02,03,22,23,30,31,32,39,40 and 41 ISO dimension series,several designs are avaiable making the use of tailored housings unnecessary and thus enabling cost-effective bearing arrangements to be made.

Split  Plummer block housing working with spherical roller bearings can achieve maximum service life with less need for maintenace,it is reduce the cost of maintenance,and also the design of plummer block housing with spherical roller bearing are easy alignment and handling during installation. so the plummer block housing with spherical roller bearing are widely used in the applications like:

-- Material handling

-- Handling systems

-- Mining and construction

-- Fluid machinery

-- Metallurgical

-- Pulp and paper

So split plummer block housing can meet their demand for demands as follows:

-- Long service life

-- Robust design

-- Long relubrication intervals

-- Ready for relubrication

-- Condition monitoring facilities

-- Avoid risk of mixed caps

-- Fast and easy mounting and dismounting

Split plummer block housing with spherical roller bearing sometime need more support when it working,adapter

sleeves,cylindrical

seats on stepped shafts,Standard seals,Labyrinth seals,Special seals,End covers,Locating rings,Lubrication,

Some suffix of Split plummer block housing

– Housing for a bearing on an adapter sleeve and a straight shaft

G Housing for a bearing with a cylindrical bore and for a stepped shaft

L Housing for a non-locating bearing arrangement

F Housing for a locating bearing arrangement

TURT Housing prepared for oil lubrication (spherical roller bearing) with seals

TURA Housing prepared for oil lubrication (CARB toroidal roller bearing) with seals

TURP Housing with a special seal for large axial movement and circulating oil lubrication

V Housing with grease escape holes in the base

T A drilled and tapped hole 1/8-27 NPSF at one side of the cap (opposite to the lock nut) to take a grease fitting AH 1/8-27 PTF

TD A drilled and tapped hole 1/8-27 NPSF on both sides of the cap to take a grease fitting AH 1/8-27 PTF

for relubrication of the seals; two fittings supplied with the housing

SN Housing with a drilled and tapped hole for a sensor

XRB as the experience Split plummer block housing manufacturer & supplier and China bearing manufacturer,it can supply the best solution for S3202 A-2RS1 bearings according to their specific applications

We accepted DHL,FEDEX,TNT express for small order and samples order,also the transportation By AIR or By Sea,by Train are all avaiable.we are sure we can ship our Split plummer block housing to your office at the first time.More technical details,please contact with :

E-mail: brandbearings@gmail.com,

Skype:brandbearings

www.xrbearing.com