SED split plummer block housings

SED split plummer block housings for spherical roller bearings is one kind of Plummer block housings,it made of Cast iron, SED 30,SED31,SED32 and SED39 Series split plummer block housings are painted black using water based alkyd paint,the paint is not affected by most lubrication or engine oils,cutting fluids or alkalescent washing chemicals,unpainted surfaces are protected by a solventless rust inhibitor.variants of SED split plummer block housings,including housing painted to other colours,housing with a narrower base and differently attachment bolt holes,this housing for bearings on cylindrical seat on stepped shafts and housings modified for circulating oil lubrication.

 

The tapped hole used for grease relubrication can be used as the oil inlet.this housing are supplied standard with a multi-seal on each side,which consists of an integrated labyrinth seal and a three stage labyrinth,the radial shaft seal is installed in the radial seal cover,which is then mounted onto the labyrinth seal cover.

 

SED Split plummer block housings are supplied with a cover for either shaft ends or through shafts

1.Housings with a cover for shaft ends have the designation suffix A

2.Housings with a cover for through shafts have the designation suffix B

 

SED Split plummer block housings can be used for both the locating and non-locating bearing positions and are supplied two designs, housing with suffix F have a bearing seat that matchs the bearing width,these housings should be used for spherical roller bearing in the locating position and CARB toroidal roller bearings in the non-locating position. housing with suffix L have a bearing seat that is wider than the bearing,these housings should be used for spherical roller bearings in the non-locating position,this housing paint is heat resistand up to 80 degree material temperature or 100 degree ambient temperature,the housing material does not have any addional temperature limits except for very low temperature applications where impact strength could be a factor.

 

Designation of SED Split plummer block housings

 

SED3292

SED3296

SED31/500

SED32/500

SED31/530

SED32/530

SED30/560

SED31/560

SED32/560

SED39/600

SED30/600

SED31/600

SED32/600

SED39/630

SED30/630

SED31/630

SED39/670

SED30/670

SED31/670

SED32/670

SED39/710

SED30/710

SED31/710

SED32/710

SED39/750

SED30/750

SED31/750

SED32/750

SED39/800

SED30/800

SED31/800

SED39/850

SED30/850

SED31/850

SED39/900

SED30/900

SED39/950

SED30/950

 

XRB as the biggest SED split plummer block housings supplier and China bearing manufacturer, it can supply the best solution of split plummer block housings according to their specific applications,its large quantity stock can meet your demand with lowest price and fast delivery. small order and big order are all available with fast  delivery and saft package,we can ship SED split plummer block housings to your office at the first time,more technical details,please contact with 

 

E-mail:brandbearings@gmail.com

Skype:brandbearings

www.xrbearing.com